First launched in 1984, this pump is regarded as the bechmark for high pressure pumping applications across multiple industries.
The benchmark for high pressure pumping applications
First launched in 1984, the Scamont SP200 pump is regarded as the benchmark for high pressure pumping applications across multiple industries. The most common application of the Scamont SP200 is in the mining industry where the removal of mud, sludge and dirty water from underground is of critical importance.
The Scamont range is the most advanced in the positive displacement mud pump class because it incorporates innovative design features with proven mechanical technology. The pump casing is made from fabricated steel and stress relieved before machining, thus providing exceptional rigidity. The split-casing design allows for quick and easy maintenance and refurbishment to be carried out more effectively and efficiently than previous generation pumps. This includes the ability to replace bearings and gears with minimum effort.
Recommended Motor Size: 110 kW
Larger motors can be installed however maximum pressure cannot be exceeded.
Recommended NPSHr: 9.8kPa (gauge)
Suction lines longer than 6m will result in a greater NPSHr.
Please contact a Scamont representative to assist.
Pump Monitoring Device
Scamont offers a lubrication and heat monitoring system which trips the pump on low oil, filter block or oil temperature limit.
Materials of Construction
Scamont Engineering can alter the materials of construction for any application including mud and acid water.
Curves
For further information regarding the performance and general arrangement of the Scamont SP200 please contact Scamont Engineering directly.
| Pump Configuration | Displacement (l/s) | Max Pressure (MPa) |
|---|---|---|
| SP200 3" | 4.63 | 20.7 |
| SP200 3.5" | 6.3 | 15.8 |
| SP200 4" | 8.23 | 12.01 |
| SP200 4.5" | 10.42 | 9.55 |
